Showing posts with label corset. Show all posts
Showing posts with label corset. Show all posts

Tuesday, March 2, 2010

Project: Victorian Bustle Gown. It's a corset!




Last night at about 12:30am, I finally finished my Victorian corset. It's made out of a double layer of white cotton coutil cut into 12 panels, and trimmed in blue. It has a busk in the center front, many many steel bones, both 1/4 inch and 1/2 inch, and 34 metal grommets down the back. It took me two days plus another evening to do the sewing, mostly by machine, but with a little finishing work done by hand. I even did some machine-embroidery leaves on the bust gores to add some color and interest. I'm really proud of it.

I ended up making more adjustments to the pattern before I started cutting the coutil, and I still think the bust is a little funny. It flares out too much at the top, so I'll probably change that in future patterns. However, as far as I can tell, Victorian corsets didn't really cover the whole bust; they pushed it up, but didn't provide support like a modern bra does. This one comes just over halfway up the bust. Also, I probably could have made it another inch or so smaller in the back. I can lace it completely closed. Apparently I have a high "squish factor".

The Laughing Moon Mercantile (# 100, Ladies Victorian Underwear) pattern I used worked out fairly well. I did have to make a couple of adjustments, but I would have been lost without the pattern to start with. It has very clear directions with lots of illustrations. I hope to get a lot of use out of this pattern - it was a very good buy at $14. Also, for the uninitiated, corset supplies can't be found at most normal fabric stores. You pretty much have to order it online - I bought my supplies, including the coutil, from www.corsetmaking.com, and I've been very happy with them so far. They sell grommets by the gross! And I've already gone through over a gross between this corset and my two Renaissance bodices and arm bracers.

I've tried the corset on a couple of times, and it's fairly comfortable. Sitting down is a little difficult - perhaps I made it too long. The bottom of the corset hits my legs,and the whole thing shifts up, pushing my bust toward my chin. However, I'm really pleased with it, and it should look really good under the late Victorian bustle styles. Here's some more pictures.


Detail of the center front. Notice the embroidery leaves. And the bow! The bow makes me happy.


Side view. I apologize for the poor quality pictures. It seems that I am a seamstress, but photography is not one of my skills.


Back view. It laces much more tightly when I put it on me, however, my dress form doesn't squish like human flesh does. I'll try to get a picture with it all on me soon.

Saturday, February 20, 2010

Project: Victorian Bustle Gown

I spent much of last weekend working on my Victorian undergarments. I've completed the chemise and drawers. Both were fairly simple, and I thought they turned out rather nicely. The pattern suggested sewing six decorative tucks near the hem of both the chemise and each leg of the drawers, which you can certainly skip, but I thought they added a bit of charm. I also added lace around the shoulders and arms, and the hem of the chemise, but I think the lace on the hem looks funny with the tucks, and may end up taking it out.







I've also begun work on the corset. The Laughing Moon #100 (Ladies Victorian Underwear) pattern I'm using includes patterns for two corsets: The Dore straight seem, and the Silverado, which includes bust gores. Since I'm rather blessed (or cursed) in that area, I'm using the Silverado pattern. They also suggest making a mock-up of the corset to ensure sizing before cutting up your expensive fabric. This is a very good idea, as I found I had to make several adjustments. I'm doing a single layer mock-up out of an old curtain I found in a thrift store.

The pattern consists of 5 pieces. Keep yourself organized, because it's very easy to forget which piece is which. It's also a good idea to mark the size you're cutting with a marker or colored pen, as there are a lot of lines, and it's very easy to get confused. I found that the pattern runs a little large. I initially cut it to my measurements, but the ends met in the back - there is supposed to be a 2 inch gap for lacing. The bust gores were also way too big. I ended up cutting them two sizes smaller than my bra size, but I think that will work out okay. With corsets, it seems that too small is better than too big.





My coutil and the rest of my corset hardware should come in this next week, so hopefully I'll be able to start of the actual corset soon. I'm planning to seem rip my mock-up apart and just use it as the pattern. Also, as you can see, my dress form came in this week, about which I am very excited. I'm mostly happy with it, but it has a couple of issues. I'll do a review of it later.

Saturday, February 13, 2010

Let's get this show on the road...

My big, exciting plans were temporarily postponed due to money reasons, but I finally put my foot down. Though I've near depleted my account, I have some fun new toys to play with.




I drove myself down the hill this morning and purchased a shiny, brand new, mid-range Brother sewing machine. It has about 40 different stitches, and does one-step buttonholes. I hope it will be a good little workhorse machine. And the best part: it's much faster than sewing by hand with a needle and thread. It's a bit pink, but that's my only complaint thus far. So now, I have no excuses to keep me from sewing.

My first project will hopefully begin tomorrow. My fabric is pre-washing in the washing machine right now. I've wanted to make Victorian clothing for quite some time, so I'm starting out with a set of Victorian foundation garments.

Though I'm not good with patterns, I decided that getting the correct shape for a historically correct Victorian corset was beyond me, so I purchased a pattern. The most highly-reviewed pattern I found online was the #100 Ladies Victorian Underwear pattern from Laughing Moon Mercantile. It comes with patterns for the Chemise and Drawers, as well two separate corset patterns, and the one pattern includes sizes 6-26 and bust sizes A-4D. And it cost only $14. If it turns out well, it should be a very good buy. A full review will come later, after I've had a chance to try it out. From the same company, I've also purchased a pattern which includes six different types of hoops and supports, roughly covering years 1856-1889, which in my opinion, certainly covers all the fun stuff.




While away, I also purchased about 15 yards of white cotton muslin and broadcloth for the chemise, drawers, and petticoats, along with all the requisite trim, notions, boning, lacing, grommets, and tapes. This is going to be a very expensive project. Pictures to follow, as soon as I get started. Happy sewing!